What are you ordering?
Physical product
3D printed and delivered to your door
No download
The 3D model is protected; you are not buying a file
Printics handles everything
Production, packaging, shipping & customer service
Sterke Drager 14cm - Past op IKEA Skadis
Print directly via Printics
Choose your material and settings, and we'll calculate the exact price. Printics prints, packages and ships the product to you.
Calculate print price & orderDeze drager van 14 cm is ontworpen voor een stevige ondersteuning op een pegboard. Door de extra lengte biedt dit model ruimte voor grotere gereedschappen of objecten die een solide en stabiele basis nodig hebben om niet te verschuiven.
The creator recommends the following print settings. The default choice ★ gives a good result.
Materiaal
Summary by material family. Choose your colors in the calculator.
Laaghoogte
| Option | Recommendation |
|---|---|
| 0.08mm - Ultra fijn (0.080mm) | ○ Neutral |
| 0.12mm - Fijn (0.120mm) | Suitable |
| 0.16mm - Standaard-Fijn (0.160mm) | Suitable |
| 0.20mm - Standaard (0.200mm) | Default |
| 0.24mm - Grof (0.240mm) | ○ Neutral |
| 0.05mm Per laag - Zeer hoge kwaliteit (0.050mm) | ○ Neutral |
Vulling (infill)
| Option | Recommendation |
|---|---|
| 10% (Gyroid) | ○ Neutral |
| 15% (Tri-Hexagon) | ○ Neutral |
| 15% (Gyroid) | Default |
| 15% (Grid) | Suitable |
| 20% (Tri-Hexagon) | ○ Neutral |
| 20% (Gyroid) | ○ Neutral |
| 20% (Grid) | ○ Neutral |
| 25% (Gyroid) | Suitable |
| 25% (Tri-Hexagon) | ○ Neutral |
| 25% (Grid) | ○ Neutral |
| 30% (Grid) | ○ Neutral |
| 30% (Gyroid) | ○ Neutral |
| 30% (Tri-Hexagon) | ○ Neutral |
| 35% (Grid) | ○ Neutral |
| 35% (Gyroid) | ○ Neutral |
| 35% (Tri-Hexagon) | ○ Neutral |
| 40% (Gyroid) | ○ Neutral |
| 40% (Grid) | ○ Neutral |
| 40% (Tri-Hexagon) | ○ Neutral |
| 45% (Grid) | ○ Neutral |
| 45% (Gyroid) | ○ Neutral |
| 45% (Tri-Hexagon) | ○ Neutral |
| 50% (Gyroid) | ○ Neutral |
| 50% (Tri-Hexagon) | ○ Neutral |
| 50% (Grid) | ○ Neutral |
| 85% (Tri-Hexagon) | ○ Neutral |
| 85% (Grid) | ○ Neutral |
| 85% (Gyroid) | Suitable |
| 100% (Grid) | Suitable |
| Not suitable: 5% (Tri-Hexagon), 5% (Grid), 5% (Gyroid), 10% (Tri-Hexagon), 10% (Grid) | |
Support
2 files are automatically added when you open this design in the price calculator.
-
041007 - drager config - standaard fit nieuwe onderkant.stlfrom € 3,50
-
041007 - drager config - standaard fit nieuwe onderkant 2-pack.stl
You are not buying a 3D file. You are ordering a physical 3D-printed product, produced and shipped by Printics. The original model file is protected and is not available for download.